Your Meizu M5 Mini Bootloop? Let’s Reapair it
How to Flash Meizu M5 Mini without PC – The method that we will provide below is not only for updating but also can be used for downgrades. But this time we will try to do it on the Meizu M5 Mini which has bootloop or softbrick.
To repair the Meizu M5 Mini that has been damaged, such as bootloop, softbrick, or returning to stock ROM, it is not too difficult, but it’s good if you do it carefully and not too hastily. Because it is feared it will worsen the damage.
Previously, my friend also needed to know something like what needed to be prepared to make improvements to the Meizu M5 Mini, this time improvement would be focused on bootloop or softbrick. So for others it depends on the situation of your cellphone friend.
Now, please prepare what you need when doing flashing later, such as the Meizu M5 Mini cellphone, the internet package that is quite a lot or if it is enough to download the firmware file for 1.5 GB or just use wifi to save it, PC or Laptop and data cable. Just in case if the process is long you can also eat snacks.
Next, please also prepare a strong mentality to do flashing because this requires a courage so that the way that is done on flashing the Mini Meizu M5 can work. The ingredients above please buddy prepare, and for materials such as Meizu M5 Mini firmware, please take it below.
Take the Meizu M5 Mini firmware below
- Download Firmware Meizu M5 Mini here
PS: We are not responsible for what will happen to your friend’s Meizu M5 Mini. However, we will help if there are difficulties. Charging your battery is also more than 50%, but if you want it to be good if it’s full.
Tutorial Flashing/Update Meizu M5 Mini Flyme OS
- Turn off your cellphone.
- Enter the Recovery Mode by “pressing and holding the volume up button plus the power button”.
- Connect your cellphone to Computer / Laptop.
- Copy the firmware that you have downloaded to the directory with the name recovery.
- When it’s finished, now it’s back on your cellphone.
- Checklist system upgrade and clear data.
- Then press Start.
- The flashing process will run around 10 minutes or it can be more.
- If you have finished your cellphone will restart automatically.
NB: If the above process has been completed, God willing, your cellphone can be used again but at first boot it will likely be a little longer, so please wait for a few minutes it can be up to 15 minutes for the first boot after flashing.
The tutorial above has been proven by many people and thank God is successful and not many reap failure. If you have a failure, you may have to find a fault where, because it could be that the failure lies in the eMMC of your friend’s Meizu M5 Mini cellphone that is not functioning properly.
So how do I flash Meizu M5 Mini tutorial without a PC from us if you want to ask please go through the comments column or you can go through contact us or via our fb page fans. That’s all from us if this tutorial according to your friend is useful, what’s wrong with sharing it with friends, thanks and assalamualaikum.